Huawei Ascend Y520-U03
Huawei Ascend Y520-U03 is a Huawei firmware file listed under Huawei, distributed as Huawei_Y520-U03_TIGO_HN_MT6572_150818.zip with a download size of 544 MB. It is built for the MediaTek MT6572 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Ascend Y520-U03
The Huawei Ascend Y520-U03 runs on Huawei's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei Ascend Y520-U03 a fresh start without the clutter that builds up over time. File Name: Huawei_Y520-U03_TIGO_HN_MT6572_150818.zip File Size: 544 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Huawei Ascend Y520-U03 should run like a brand new unit.
File Details
| File name | Huawei Ascend Y520-U03 |
|---|---|
| Package | Huawei_Y520-U03_TIGO_HN_MT6572_150818.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6572 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 544 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Ascend Y520-U03 with SP Flash Tool
- Confirm Huawei Ascend Y520-U03 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (544 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
Frequently asked questions
Is Huawei Ascend Y520-U03 free to download?
Yes, Huawei Ascend Y520-U03 can be downloaded free of charge from this page.
How large is the download?
The Huawei Ascend Y520-U03 package is 544 MB.
Which tool do I need to flash Huawei Ascend Y520-U03?
Huawei Ascend Y520-U03 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.