Huawei

Huawei Ascend G700-U10

Huawai_Ascend_G700-U10_MT6589.zip
June 16, 2026 Huawei 775 MB Huawei

Huawei Ascend G700-U10 is a Huawei firmware file listed under Huawei, distributed as Huawai_Ascend_G700-U10_MT6589.zip with a download size of 775 MB. It is built for the MediaTek MT6589 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
775 MB
Download Free

About Huawei Ascend G700-U10

Looking for the official stock firmware for your Huawei Ascend G700-U10? You're in the right place. Below is the original Huawei flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Huawei Ascend G700-U10 a fresh start without the clutter that builds up over time. File Name: Huawai_Ascend_G700-U10_MT6589.zip File Size: 775 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Huawei Ascend G700-U10 should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameHuawei Ascend G700-U10
PackageHuawai_Ascend_G700-U10_MT6589.zip
Brand / PlatformHuawei
CategoryHuawei
ChipsetMediaTek MT6589
Flash toolSP Flash Tool
Package formatZIP archive
File size775 MB
Date addedJune 16, 2026
PriceFree

How to flash Huawei Ascend G700-U10 with SP Flash Tool

  1. Confirm Huawei Ascend G700-U10 matches your exact device model and that the phone uses the MT6589 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (775 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Huawei Ascend G700-U10 free to download?

Yes, Huawei Ascend G700-U10 can be downloaded free of charge from this page.

How large is the download?

The Huawei Ascend G700-U10 package is 775 MB.

Which tool do I need to flash Huawei Ascend G700-U10?

Huawei Ascend G700-U10 is MediaTek MT6589 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.

More Huawei files

Back to Huawei