Huawei Ascend G628 G628-TL00 Clone
Huawei Ascend G628 G628-TL00 Clone is a Huawei firmware file listed under Huawei, distributed as Huawei_Ascend_G628_G628-TL00_Clone_MT6752_181115_4.4.4.zip with a download size of 734 MB. It is built for the MediaTek MT6752 chipset and runs Android 4.4 (KitKat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Huawei Ascend G628 G628-TL00 Clone
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Huawei Ascend G628 G628-TL00 Clone owners, this page hosts the original Huawei stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Huawei Ascend G628 G628-TL00 Clone back to square one. File Name: Huawei_Ascend_G628_G628-TL00_Clone_MT6752_181115_4.4.4.zip File Size: 734 MB Back up your files, charge the Huawei Ascend G628 G628-TL00 Clone past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Huawei Ascend G628 G628-TL00 Clone returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Huawei Ascend G628 G628-TL00 Clone |
|---|---|
| Package | Huawei_Ascend_G628_G628-TL00_Clone_MT6752_181115_4.4.4.zip |
| Brand / Platform | Huawei |
| Category | Huawei |
| Chipset | MediaTek MT6752 |
| Android version | Android 4.4 (KitKat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 734 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Huawei Ascend G628 G628-TL00 Clone with SP Flash Tool
- Confirm Huawei Ascend G628 G628-TL00 Clone matches your exact device model and that the phone uses the MT6752 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (734 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Huawei Firmware Guide: Finding and Flashing Stock ROMsTo reflash or unbrick a Huawei device, you must identify the exact model number and chipset to find the compatible stock ROM. Depending on the hardware, you will typically use tools like SP Flash…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Huawei Ascend G628 G628-TL00 Clone free to download?
Yes, Huawei Ascend G628 G628-TL00 Clone can be downloaded free of charge from this page.
How large is the download?
The Huawei Ascend G628 G628-TL00 Clone package is 734 MB.
Which tool do I need to flash Huawei Ascend G628 G628-TL00 Clone?
Huawei Ascend G628 G628-TL00 Clone is MediaTek MT6752 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Huawei Ascend G628 G628-TL00 Clone?
This firmware is Android 4.4 (KitKat).
Which devices is this firmware for?
This file is intended for Huawei devices. Always confirm it matches your specific model before flashing.