Evertek EverStar D40 Stock Firmware
Evertek EverStar D40 Stock Firmware is a Evertek firmware file listed under Evertek, distributed as Evertek_EverStar_D40_MT6572_15102015_4.4.2.zip with a download size of 485 MB. It was published on June 16, 2026. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Evertek EverStar D40 Stock Firmware
Here you will find all the latest Evertek firmware for Evertek EverStar D40. If you are looking for Evertek EverStar D40 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Evertek EverStar D40, if it is not, then flashing the below stock firmware can brick your device. The Evertek EverStar D40 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Evertek EverStar D40 Firmware File Name : Evertek_EverStar_D40_MT6572_15102015_4.4.2.zip File Size : 485 MB Get Firmware Also: Evertek EverStar Stock Firmware How To Flash Evertek EverStar D40 Stock Firmware Download and extract the Evertek EverStar D40 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Evertek EverStar D40 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Evertek EverStar D40 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Evertek EverStar D40 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Evertek EverStar D40 Stock Firmware |
|---|---|
| Package | Evertek_EverStar_D40_MT6572_15102015_4.4.2.zip |
| Brand / Platform | Evertek |
| Category | Evertek |
| File size | 485 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Evertek EverStar D40 Stock Firmware matches your exact device model and that it is intended for Evertek hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (485 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Evertek EverStar D40 Stock Firmware free to download?
Yes, Evertek EverStar D40 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Evertek EverStar D40 Stock Firmware package is 485 MB.
Which devices is this firmware for?
This file is intended for Evertek devices. Always confirm it matches your specific model before flashing.