Evercoss Jump Tab S3 Plus AT7H
Evercoss Jump Tab S3 Plus AT7H is a Evercoss firmware file listed under Evercoss, distributed as Evercoss_Jump_Tab_S3_Plus_AT7H_MT6572_V2.7_161010.zip with a download size of 468 MB. It was published on June 16, 2026. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Evercoss Jump Tab S3 Plus AT7H
If your Evercoss Jump Tab S3 Plus AT7H has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Evercoss flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Evercoss_Jump_Tab_S3_Plus_AT7H_MT6572_V2.7_161010.zip File Size: 468 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Evercoss Jump Tab S3 Plus AT7H should run like a brand new unit.
File Details
| File name | Evercoss Jump Tab S3 Plus AT7H |
|---|---|
| Package | Evercoss_Jump_Tab_S3_Plus_AT7H_MT6572_V2.7_161010.zip |
| Brand / Platform | Evercoss |
| Category | Evercoss |
| File size | 468 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to use this file
- Confirm Evercoss Jump Tab S3 Plus AT7H matches your exact device model and that it is intended for Evercoss hardware.
- Back up your personal data, as flashing firmware can erase the device.
- Download the file (468 MB) using the button above.
- Use the appropriate flashing tool for your platform and follow the on-screen steps.
- Keep the device charged and connected until the process completes.
Frequently asked questions
Is Evercoss Jump Tab S3 Plus AT7H free to download?
Yes, Evercoss Jump Tab S3 Plus AT7H can be downloaded free of charge from this page.
How large is the download?
The Evercoss Jump Tab S3 Plus AT7H package is 468 MB.
Which devices is this firmware for?
This file is intended for Evercoss devices. Always confirm it matches your specific model before flashing.