Digma

Digma Platina 10.2 4G LTE NS1002QL

Digma_Platina_10.2_4G_LTE_NS1002QL_20141108_QPST.zip
June 16, 2026 Digma 544 MB Digma

Digma Platina 10.2 4G LTE NS1002QL is a Digma firmware file listed under Digma, distributed as Digma_Platina_10.2_4G_LTE_NS1002QL_20141108_QPST.zip with a download size of 544 MB. It is built for Qualcomm-based devices and runs Android 10, with a firmware build date of November 08, 2014. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
544 MB
Download Free

About Digma Platina 10.2 4G LTE NS1002QL

Looking for the official stock firmware for your Digma Platina 10.2 4G LTE NS1002QL? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Digma Platina 10.2 4G LTE NS1002QL to factory condition. File Name: Digma_Platina_10.2_4G_LTE_NS1002QL_20141108_QPST.zip File Size: 544 MB Back up your files, charge the Digma Platina 10.2 4G LTE NS1002QL past 50 percent, install the matching drivers, and only then begin. When it finishes, the Digma Platina 10.2 4G LTE NS1002QL restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameDigma Platina 10.2 4G LTE NS1002QL
PackageDigma_Platina_10.2_4G_LTE_NS1002QL_20141108_QPST.zip
Brand / PlatformDigma
CategoryDigma
PlatformQualcomm
Android versionAndroid 10
Build dateNovember 08, 2014
Flash toolQFIL (part of Qualcomm QPST)
Package formatZIP archive
File size544 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Platina 10.2 4G LTE NS1002QL with QFIL

  1. Confirm Digma Platina 10.2 4G LTE NS1002QL matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (544 MB) using the button above and extract it on a Windows PC.
  4. Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
  5. In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
  6. Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
  7. Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.

Frequently asked questions

Is Digma Platina 10.2 4G LTE NS1002QL free to download?

Yes, Digma Platina 10.2 4G LTE NS1002QL can be downloaded free of charge from this page.

How large is the download?

The Digma Platina 10.2 4G LTE NS1002QL package is 544 MB.

Which tool do I need to flash Digma Platina 10.2 4G LTE NS1002QL?

Digma Platina 10.2 4G LTE NS1002QL is Qualcomm firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.

What Android version is Digma Platina 10.2 4G LTE NS1002QL?

This firmware is Android 10, built on November 08, 2014.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma