Digma Optima 8 Z801 TS8227PL
Digma Optima 8 Z801 TS8227PL is a Digma firmware file listed under Digma, distributed as Digma_Optima_8_Z801_TS8227PL_Rev1_200904_SPD.zip with a download size of 1.44 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Optima 8 Z801 TS8227PL
Looking for the official stock firmware for your Digma Optima 8 Z801 TS8227PL? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Optima_8_Z801_TS8227PL_Rev1_200904_SPD.zip File Size: 1.44 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Digma Optima 8 Z801 TS8227PL returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Digma Optima 8 Z801 TS8227PL |
|---|---|
| Package | Digma_Optima_8_Z801_TS8227PL_Rev1_200904_SPD.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1.44 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Optima 8 Z801 TS8227PL with SPD ResearchDownload
- Confirm Digma Optima 8 Z801 TS8227PL matches your exact device model and that it is intended for Digma hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.44 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Digma Optima 8 Z801 TS8227PL free to download?
Yes, Digma Optima 8 Z801 TS8227PL can be downloaded free of charge from this page.
How large is the download?
The Digma Optima 8 Z801 TS8227PL package is 1.44 GB.
Which tool do I need to flash Digma Optima 8 Z801 TS8227PL?
Digma Optima 8 Z801 TS8227PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.