Digma Optima 7a 100S TS7222PG
Digma Optima 7a 100S TS7222PG is a Digma firmware file listed under Digma, distributed as Digma_Optima_7a_100S_TS7222PG_Rev5_Factory_211015_SPD.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Optima 7a 100S TS7222PG
Looking for the official stock firmware for your Digma Optima 7a 100S TS7222PG? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Digma Optima 7a 100S TS7222PG to factory condition. File Name: Digma_Optima_7a_100S_TS7222PG_Rev5_Factory_211015_SPD.zip File Size: 1 GB Back up your files, charge the Digma Optima 7a 100S TS7222PG past 50 percent, install the matching drivers, and only then begin. When it finishes, the Digma Optima 7a 100S TS7222PG restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Digma Optima 7a 100S TS7222PG |
|---|---|
| Package | Digma_Optima_7a_100S_TS7222PG_Rev5_Factory_211015_SPD.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Optima 7a 100S TS7222PG with SPD ResearchDownload
- Confirm Digma Optima 7a 100S TS7222PG matches your exact device model and that it is intended for Digma hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Digma Optima 7a 100S TS7222PG free to download?
Yes, Digma Optima 7a 100S TS7222PG can be downloaded free of charge from this page.
How large is the download?
The Digma Optima 7a 100S TS7222PG package is 1 GB.
Which tool do I need to flash Digma Optima 7a 100S TS7222PG?
Digma Optima 7a 100S TS7222PG is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.