Digma

Digma Optima 7 X700 TS7224PL

Digma_Optima_7_X700_TS7224PL_4G_Rev1_201102_SPD.zip
June 16, 2026 Digma 1.52 GB Digma

Digma Optima 7 X700 TS7224PL is a Digma firmware file listed under Digma, distributed as Digma_Optima_7_X700_TS7224PL_4G_Rev1_201102_SPD.zip with a download size of 1.52 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.52 GB
Download Free

About Digma Optima 7 X700 TS7224PL

The Digma Optima 7 X700 TS7224PL runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Digma Optima 7 X700 TS7224PL a fresh start without the clutter that builds up over time. File Name: Digma_Optima_7_X700_TS7224PL_4G_Rev1_201102_SPD.zip File Size: 1.52 GB Back up your files, charge the Digma Optima 7 X700 TS7224PL past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Digma Optima 7 X700 TS7224PL should run like a brand new unit.

File Details

File nameDigma Optima 7 X700 TS7224PL
PackageDigma_Optima_7_X700_TS7224PL_4G_Rev1_201102_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.52 GB
Date addedJune 16, 2026
PriceFree

How to flash Digma Optima 7 X700 TS7224PL with SPD ResearchDownload

  1. Confirm Digma Optima 7 X700 TS7224PL matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.52 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Optima 7 X700 TS7224PL free to download?

Yes, Digma Optima 7 X700 TS7224PL can be downloaded free of charge from this page.

How large is the download?

The Digma Optima 7 X700 TS7224PL package is 1.52 GB.

Which tool do I need to flash Digma Optima 7 X700 TS7224PL?

Digma Optima 7 X700 TS7224PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma