Digma Optima 10 Z802 TS1229PL
Digma Optima 10 Z802 TS1229PL is a Digma firmware file listed under Digma, distributed as Digma_Optima_10_Z802_TS1229PL_Rev2_Factory_210317_SPD.zip.zip with a download size of 1.48 MB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Optima 10 Z802 TS1229PL
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Digma Optima 10 Z802 TS1229PL owners, this page hosts the original Digma stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Digma Optima 10 Z802 TS1229PL back to square one. File Name: Digma_Optima_10_Z802_TS1229PL_Rev2_Factory_210317_SPD.zip.zip File Size: 1.48 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Digma Optima 10 Z802 TS1229PL returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Digma Optima 10 Z802 TS1229PL |
|---|---|
| Package | Digma_Optima_10_Z802_TS1229PL_Rev2_Factory_210317_SPD.zip.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1.48 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Optima 10 Z802 TS1229PL with SPD ResearchDownload
- Confirm Digma Optima 10 Z802 TS1229PL matches your exact device model and that it is intended for Digma hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.48 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Digma Optima 10 Z802 TS1229PL free to download?
Yes, Digma Optima 10 Z802 TS1229PL can be downloaded free of charge from this page.
How large is the download?
The Digma Optima 10 Z802 TS1229PL package is 1.48 MB.
Which tool do I need to flash Digma Optima 10 Z802 TS1229PL?
Digma Optima 10 Z802 TS1229PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.