Digma

Digma Optima 10 X702 TS1228PL

Digma_Optima_10_X702_TS1228PL_Rev1_Factory_201113_SPD.zip
April 28, 2026 Digma 1.52 GB Digma

Digma Optima 10 X702 TS1228PL is a Digma firmware file listed under Digma, distributed as Digma_Optima_10_X702_TS1228PL_Rev1_Factory_201113_SPD.zip with a download size of 1.52 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on April 28, 2026. This page has been viewed 26 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.52 GB
Download Free

About Digma Optima 10 X702 TS1228PL

Digma Optima 10 X702 TS1228PL Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Digma_Optima_10_X702_TS1228PL_Rev1_Factory_201113_SPD.zip File Size: 1.52 GB Flash Tool: SPD Flash Tool How to Flash (install): Follow Tutorial Mirror 1 (Free)Mirror 2 (Paid)

File Details

File nameDigma Optima 10 X702 TS1228PL
PackageDigma_Optima_10_X702_TS1228PL_Rev1_Factory_201113_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.52 GB
Date addedApril 28, 2026
PriceFree

How to flash Digma Optima 10 X702 TS1228PL with SPD ResearchDownload

  1. Confirm Digma Optima 10 X702 TS1228PL matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.52 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Optima 10 X702 TS1228PL free to download?

Yes, Digma Optima 10 X702 TS1228PL can be downloaded free of charge from this page.

How large is the download?

The Digma Optima 10 X702 TS1228PL package is 1.52 GB.

Which tool do I need to flash Digma Optima 10 X702 TS1228PL?

Digma Optima 10 X702 TS1228PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma