Digma

Digma Optima 10 X702

Digma_Optima_10_X702_R1_201113_10_SPD.zip
June 16, 2026 Digma 1.5 GB Digma

Digma Optima 10 X702 is a Digma firmware file listed under Digma, distributed as Digma_Optima_10_X702_R1_201113_10_SPD.zip with a download size of 1.5 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.5 GB
Download Free

About Digma Optima 10 X702

Looking for the official stock firmware for your Digma Optima 10 X702? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Digma Optima 10 X702 back to square one. File Name: Digma_Optima_10_X702_R1_201113_10_SPD.zip File Size: 1.5 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Digma Optima 10 X702 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameDigma Optima 10 X702
PackageDigma_Optima_10_X702_R1_201113_10_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.5 GB
Date addedJune 16, 2026
PriceFree

How to flash Digma Optima 10 X702 with SPD ResearchDownload

  1. Confirm Digma Optima 10 X702 matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.5 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Optima 10 X702 free to download?

Yes, Digma Optima 10 X702 can be downloaded free of charge from this page.

How large is the download?

The Digma Optima 10 X702 package is 1.5 GB.

Which tool do I need to flash Digma Optima 10 X702?

Digma Optima 10 X702 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma