Digma

Digma Linx Pay 4G LS5053ML

Digma_Linx_Pay_4G_LS5053ML_MT6739_V1.14_20181029.zip
June 16, 2026 Digma 1020 MB Digma

Digma Linx Pay 4G LS5053ML is a Digma firmware file listed under Digma, distributed as Digma_Linx_Pay_4G_LS5053ML_MT6739_V1.14_20181029.zip with a download size of 1020 MB. It is built for the MediaTek MT6739 chipset, with a firmware build date of October 29, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1020 MB
Download Free

About Digma Linx Pay 4G LS5053ML

The Digma Linx Pay 4G LS5053ML runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Linx_Pay_4G_LS5053ML_MT6739_V1.14_20181029.zip File Size: 1020 MB Back up your files, charge the Digma Linx Pay 4G LS5053ML past 50 percent, install the matching drivers, and only then begin. Once installed, your Digma Linx Pay 4G LS5053ML should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameDigma Linx Pay 4G LS5053ML
PackageDigma_Linx_Pay_4G_LS5053ML_MT6739_V1.14_20181029.zip
Brand / PlatformDigma
CategoryDigma
ChipsetMediaTek MT6739
Build dateOctober 29, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size1020 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Linx Pay 4G LS5053ML with SP Flash Tool

  1. Confirm Digma Linx Pay 4G LS5053ML matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1020 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Digma Linx Pay 4G LS5053ML free to download?

Yes, Digma Linx Pay 4G LS5053ML can be downloaded free of charge from this page.

How large is the download?

The Digma Linx Pay 4G LS5053ML package is 1020 MB.

Which tool do I need to flash Digma Linx Pay 4G LS5053ML?

Digma Linx Pay 4G LS5053ML is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma