Digma

Digma Linx Atom 3G LT4049PG

Digma_Linx_Atom_3G_LT4049PG_V4.0_20180709_SPD.zip
June 16, 2026 Digma 632 MB Digma

Digma Linx Atom 3G LT4049PG is a Digma firmware file listed under Digma, distributed as Digma_Linx_Atom_3G_LT4049PG_V4.0_20180709_SPD.zip with a download size of 632 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of July 09, 2018. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
632 MB
Download Free

About Digma Linx Atom 3G LT4049PG

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Digma Linx Atom 3G LT4049PG owners, this page hosts the original Digma stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Linx_Atom_3G_LT4049PG_V4.0_20180709_SPD.zip File Size: 632 MB Back up your files, charge the Digma Linx Atom 3G LT4049PG past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Digma Linx Atom 3G LT4049PG returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameDigma Linx Atom 3G LT4049PG
PackageDigma_Linx_Atom_3G_LT4049PG_V4.0_20180709_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Build dateJuly 09, 2018
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size632 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Linx Atom 3G LT4049PG with SPD ResearchDownload

  1. Confirm Digma Linx Atom 3G LT4049PG matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (632 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Linx Atom 3G LT4049PG free to download?

Yes, Digma Linx Atom 3G LT4049PG can be downloaded free of charge from this page.

How large is the download?

The Digma Linx Atom 3G LT4049PG package is 632 MB.

Which tool do I need to flash Digma Linx Atom 3G LT4049PG?

Digma Linx Atom 3G LT4049PG is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma