Digma

Digma Linx A401 LT4018PG

Digma_Linx_A401_LT4018PG_20161130_SPD.zip
June 16, 2026 Digma 457 MB Digma

Digma Linx A401 LT4018PG is a Digma firmware file listed under Digma, distributed as Digma_Linx_A401_LT4018PG_20161130_SPD.zip with a download size of 457 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of November 30, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
457 MB
Download Free

About Digma Linx A401 LT4018PG

If your Digma Linx A401 LT4018PG has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Digma flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Digma Linx A401 LT4018PG back to square one. File Name: Digma_Linx_A401_LT4018PG_20161130_SPD.zip File Size: 457 MB Back up your files, charge the Digma Linx A401 LT4018PG past 50 percent, install the matching drivers, and only then begin. Once installed, your Digma Linx A401 LT4018PG should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameDigma Linx A401 LT4018PG
PackageDigma_Linx_A401_LT4018PG_20161130_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Build dateNovember 30, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size457 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Linx A401 LT4018PG with SPD ResearchDownload

  1. Confirm Digma Linx A401 LT4018PG matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (457 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Linx A401 LT4018PG free to download?

Yes, Digma Linx A401 LT4018PG can be downloaded free of charge from this page.

How large is the download?

The Digma Linx A401 LT4018PG package is 457 MB.

Which tool do I need to flash Digma Linx A401 LT4018PG?

Digma Linx A401 LT4018PG is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma