Digma

Digma Linx A400 LT4001PG

Digma_Linx_A400_LT4001PG_20160612_SPD.zip
June 16, 2026 Digma 450 MB Digma

Digma Linx A400 LT4001PG is a Digma firmware file listed under Digma, distributed as Digma_Linx_A400_LT4001PG_20160612_SPD.zip with a download size of 450 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of June 12, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
450 MB
Download Free

About Digma Linx A400 LT4001PG

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Digma Linx A400 LT4001PG owners, this page hosts the original Digma stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Digma Linx A400 LT4001PG back to square one. File Name: Digma_Linx_A400_LT4001PG_20160612_SPD.zip File Size: 450 MB Back up your files, charge the Digma Linx A400 LT4001PG past 50 percent, install the matching drivers, and only then begin. Once installed, your Digma Linx A400 LT4001PG should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameDigma Linx A400 LT4001PG
PackageDigma_Linx_A400_LT4001PG_20160612_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Build dateJune 12, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size450 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Linx A400 LT4001PG with SPD ResearchDownload

  1. Confirm Digma Linx A400 LT4001PG matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (450 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Linx A400 LT4001PG free to download?

Yes, Digma Linx A400 LT4001PG can be downloaded free of charge from this page.

How large is the download?

The Digma Linx A400 LT4001PG package is 450 MB.

Which tool do I need to flash Digma Linx A400 LT4001PG?

Digma Linx A400 LT4001PG is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma