Digma

Digma Hit Q401 3G HT4039PG

Digma_Hit_Q401_3G_HT4039PG_20180108_SPD.zip
June 16, 2026 Digma 953 MB Digma

Digma Hit Q401 3G HT4039PG is a Digma firmware file listed under Digma, distributed as Digma_Hit_Q401_3G_HT4039PG_20180108_SPD.zip with a download size of 953 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of January 08, 2018. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
953 MB
Download Free

About Digma Hit Q401 3G HT4039PG

Looking for the official stock firmware for your Digma Hit Q401 3G HT4039PG? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Hit_Q401_3G_HT4039PG_20180108_SPD.zip File Size: 953 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Digma Hit Q401 3G HT4039PG returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameDigma Hit Q401 3G HT4039PG
PackageDigma_Hit_Q401_3G_HT4039PG_20180108_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Build dateJanuary 08, 2018
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size953 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Hit Q401 3G HT4039PG with SPD ResearchDownload

  1. Confirm Digma Hit Q401 3G HT4039PG matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (953 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Hit Q401 3G HT4039PG free to download?

Yes, Digma Hit Q401 3G HT4039PG can be downloaded free of charge from this page.

How large is the download?

The Digma Hit Q401 3G HT4039PG package is 953 MB.

Which tool do I need to flash Digma Hit Q401 3G HT4039PG?

Digma Hit Q401 3G HT4039PG is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma