Digma Hit Q400 3G HT4023PG
Digma Hit Q400 3G HT4023PG is a Digma firmware file listed under Digma, distributed as Digma_Hit_Q400_3G_HT4023PG_20170302_SPD.zip with a download size of 576 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of March 02, 2017. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Hit Q400 3G HT4023PG
If your Digma Hit Q400 3G HT4023PG has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Digma flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Digma Hit Q400 3G HT4023PG to factory condition. File Name: Digma_Hit_Q400_3G_HT4023PG_20170302_SPD.zip File Size: 576 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Digma Hit Q400 3G HT4023PG should run like a brand new unit.
File Details
| File name | Digma Hit Q400 3G HT4023PG |
|---|---|
| Package | Digma_Hit_Q400_3G_HT4023PG_20170302_SPD.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Platform | Unisoc (Spreadtrum) |
| Build date | March 02, 2017 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 576 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Hit Q400 3G HT4023PG with SPD ResearchDownload
- Confirm Digma Hit Q400 3G HT4023PG matches your exact device model and that it is intended for Digma hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (576 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Digma Hit Q400 3G HT4023PG free to download?
Yes, Digma Hit Q400 3G HT4023PG can be downloaded free of charge from this page.
How large is the download?
The Digma Hit Q400 3G HT4023PG package is 576 MB.
Which tool do I need to flash Digma Hit Q400 3G HT4023PG?
Digma Hit Q400 3G HT4023PG is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.