Digma Hit 3G HT7071MG
Digma Hit 3G HT7071MG is a Digma firmware file listed under Digma, distributed as Digma_Hit_3G_HT7071MG_MT6572_20160315.zip with a download size of 341 MB. It is built for the MediaTek MT6572 chipset, with a firmware build date of March 15, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Hit 3G HT7071MG
If your Digma Hit 3G HT7071MG has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Digma flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Digma Hit 3G HT7071MG to factory condition. File Name: Digma_Hit_3G_HT7071MG_MT6572_20160315.zip File Size: 341 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Digma Hit 3G HT7071MG restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Digma Hit 3G HT7071MG |
|---|---|
| Package | Digma_Hit_3G_HT7071MG_MT6572_20160315.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Chipset | MediaTek MT6572 |
| Build date | March 15, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 341 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Hit 3G HT7071MG with SP Flash Tool
- Confirm Digma Hit 3G HT7071MG matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (341 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Digma Hit 3G HT7071MG free to download?
Yes, Digma Hit 3G HT7071MG can be downloaded free of charge from this page.
How large is the download?
The Digma Hit 3G HT7071MG package is 341 MB.
Which tool do I need to flash Digma Hit 3G HT7071MG?
Digma Hit 3G HT7071MG is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.