Digma First XS350 2G FT3001PM
Digma First XS350 2G FT3001PM is a Digma firmware file listed under Digma, distributed as Digma_First_XS350_2G_FT3001PM_20160923_SPD.zip with a download size of 91 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of September 23, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 21 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma First XS350 2G FT3001PM
The Digma First XS350 2G FT3001PM runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_First_XS350_2G_FT3001PM_20160923_SPD.zip File Size: 91 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Digma First XS350 2G FT3001PM should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Digma First XS350 2G FT3001PM |
|---|---|
| Package | Digma_First_XS350_2G_FT3001PM_20160923_SPD.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Platform | Unisoc (Spreadtrum) |
| Build date | September 23, 2016 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 91 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma First XS350 2G FT3001PM with SPD ResearchDownload
- Confirm Digma First XS350 2G FT3001PM matches your exact device model and that it is intended for Digma hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (91 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Digma First XS350 2G FT3001PM free to download?
Yes, Digma First XS350 2G FT3001PM can be downloaded free of charge from this page.
How large is the download?
The Digma First XS350 2G FT3001PM package is 91 MB.
Which tool do I need to flash Digma First XS350 2G FT3001PM?
Digma First XS350 2G FT3001PM is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.