Digma

Digma Citi Z510 3G

Digma_Citi_Z510_3G_20160708_SPD.zip
June 16, 2026 Digma 461 MB Digma

Digma Citi Z510 3G is a Digma firmware file listed under Digma, distributed as Digma_Citi_Z510_3G_20160708_SPD.zip with a download size of 461 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of July 08, 2016. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
461 MB
Download Free

About Digma Citi Z510 3G

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Digma Citi Z510 3G owners, this page hosts the original Digma stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Digma Citi Z510 3G back to square one. File Name: Digma_Citi_Z510_3G_20160708_SPD.zip File Size: 461 MB Back up your files, charge the Digma Citi Z510 3G past 50 percent, install the matching drivers, and only then begin. Once installed, your Digma Citi Z510 3G should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameDigma Citi Z510 3G
PackageDigma_Citi_Z510_3G_20160708_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Build dateJuly 08, 2016
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size461 MB
Date addedJune 16, 2026
PriceFree

How to flash Digma Citi Z510 3G with SPD ResearchDownload

  1. Confirm Digma Citi Z510 3G matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (461 MB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Citi Z510 3G free to download?

Yes, Digma Citi Z510 3G can be downloaded free of charge from this page.

How large is the download?

The Digma Citi Z510 3G package is 461 MB.

Which tool do I need to flash Digma Citi Z510 3G?

Digma Citi Z510 3G is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma