Digma Citi Power 4G CS5026PL
Digma Citi Power 4G CS5026PL is a Digma firmware file listed under Digma, distributed as Digma_Citi_Power_4G_CS5026PL_20170726_SPD.zip with a download size of 718 MB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of July 26, 2017. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Citi Power 4G CS5026PL
The Digma Citi Power 4G CS5026PL runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Digma Citi Power 4G CS5026PL back to square one. File Name: Digma_Citi_Power_4G_CS5026PL_20170726_SPD.zip File Size: 718 MB Back up your files, charge the Digma Citi Power 4G CS5026PL past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Digma Citi Power 4G CS5026PL returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Digma Citi Power 4G CS5026PL |
|---|---|
| Package | Digma_Citi_Power_4G_CS5026PL_20170726_SPD.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Platform | Unisoc (Spreadtrum) |
| Build date | July 26, 2017 |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 718 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Citi Power 4G CS5026PL with SPD ResearchDownload
- Confirm Digma Citi Power 4G CS5026PL matches your exact device model and that it is intended for Digma hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (718 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Digma Citi Power 4G CS5026PL free to download?
Yes, Digma Citi Power 4G CS5026PL can be downloaded free of charge from this page.
How large is the download?
The Digma Citi Power 4G CS5026PL package is 718 MB.
Which tool do I need to flash Digma Citi Power 4G CS5026PL?
Digma Citi Power 4G CS5026PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.