Digma

Digma Citi Octa 70

Digma_Citi_Octa_70_SC9863A_20191106_9.0_SPD.zip
June 16, 2026 Digma 1.5 GB Digma

Digma Citi Octa 70 is a Digma firmware file listed under Digma, distributed as Digma_Citi_Octa_70_SC9863A_20191106_9.0_SPD.zip with a download size of 1.5 GB. It is built for the Unisoc (Spreadtrum) SC9863A chipset and runs Android 9 (Pie), with a firmware build date of November 06, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 35 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.5 GB
Download Free

About Digma Citi Octa 70

Looking for the official stock firmware for your Digma Citi Octa 70? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Digma Citi Octa 70 to factory condition. File Name: Digma_Citi_Octa_70_SC9863A_20191106_9.0_SPD.zip File Size: 1.5 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Digma Citi Octa 70 should run like a brand new unit.

File Details

File nameDigma Citi Octa 70
PackageDigma_Citi_Octa_70_SC9863A_20191106_9.0_SPD.zip
Brand / PlatformDigma
CategoryDigma
ChipsetUnisoc (Spreadtrum) SC9863A
Android versionAndroid 9 (Pie)
Build dateNovember 06, 2019
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.5 GB
Date addedJune 16, 2026
PriceFree

How to flash Digma Citi Octa 70 with SPD ResearchDownload

  1. Confirm Digma Citi Octa 70 matches your exact device model and that the phone uses the SC9863A chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.5 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Citi Octa 70 free to download?

Yes, Digma Citi Octa 70 can be downloaded free of charge from this page.

How large is the download?

The Digma Citi Octa 70 package is 1.5 GB.

Which tool do I need to flash Digma Citi Octa 70?

Digma Citi Octa 70 is Unisoc (Spreadtrum) SC9863A firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

What Android version is Digma Citi Octa 70?

This firmware is Android 9 (Pie), built on November 06, 2019.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma