Digma

Digma Citi 8 E400 4G CS8231PL

Digma_Citi_8_E400_4G_CS8231PL_Rev1_201111_SPD.zip
June 16, 2026 Digma 1 GB Digma

Digma Citi 8 E400 4G CS8231PL is a Digma firmware file listed under Digma, distributed as Digma_Citi_8_E400_4G_CS8231PL_Rev1_201111_SPD.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Digma Citi 8 E400 4G CS8231PL

Looking for the official stock firmware for your Digma Citi 8 E400 4G CS8231PL? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Digma Citi 8 E400 4G CS8231PL a fresh start without the clutter that builds up over time. File Name: Digma_Citi_8_E400_4G_CS8231PL_Rev1_201111_SPD.zip File Size: 1 GB Back up your files, charge the Digma Citi 8 E400 4G CS8231PL past 50 percent, install the matching drivers, and only then begin. Once installed, your Digma Citi 8 E400 4G CS8231PL should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameDigma Citi 8 E400 4G CS8231PL
PackageDigma_Citi_8_E400_4G_CS8231PL_Rev1_201111_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Digma Citi 8 E400 4G CS8231PL with SPD ResearchDownload

  1. Confirm Digma Citi 8 E400 4G CS8231PL matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Citi 8 E400 4G CS8231PL free to download?

Yes, Digma Citi 8 E400 4G CS8231PL can be downloaded free of charge from this page.

How large is the download?

The Digma Citi 8 E400 4G CS8231PL package is 1 GB.

Which tool do I need to flash Digma Citi 8 E400 4G CS8231PL?

Digma Citi 8 E400 4G CS8231PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma