Digma

Digma Citi 7 E401 4G CS7234PL

Digma_Citi_7_E401_4G_CS7234PL_Rev1_Factory_201212_SPD.zip
June 16, 2026 Digma 1.03 GB Digma

Digma Citi 7 E401 4G CS7234PL is a Digma firmware file listed under Digma, distributed as Digma_Citi_7_E401_4G_CS7234PL_Rev1_Factory_201212_SPD.zip with a download size of 1.03 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.03 GB
Download Free

About Digma Citi 7 E401 4G CS7234PL

The Digma Citi 7 E401 4G CS7234PL runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Citi_7_E401_4G_CS7234PL_Rev1_Factory_201212_SPD.zip File Size: 1.03 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Digma Citi 7 E401 4G CS7234PL restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameDigma Citi 7 E401 4G CS7234PL
PackageDigma_Citi_7_E401_4G_CS7234PL_Rev1_Factory_201212_SPD.zip
Brand / PlatformDigma
CategoryDigma
PlatformUnisoc (Spreadtrum)
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.03 GB
Date addedJune 16, 2026
PriceFree

How to flash Digma Citi 7 E401 4G CS7234PL with SPD ResearchDownload

  1. Confirm Digma Citi 7 E401 4G CS7234PL matches your exact device model and that it is intended for Digma hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.03 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Digma Citi 7 E401 4G CS7234PL free to download?

Yes, Digma Citi 7 E401 4G CS7234PL can be downloaded free of charge from this page.

How large is the download?

The Digma Citi 7 E401 4G CS7234PL package is 1.03 GB.

Which tool do I need to flash Digma Citi 7 E401 4G CS7234PL?

Digma Citi 7 E401 4G CS7234PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Digma devices. Always confirm it matches your specific model before flashing.

More Digma files

Back to Digma