Digma Citi 1593 3G
Digma Citi 1593 3G is a Digma firmware file listed under Digma, distributed as Digma_Citi_1593_3G_MT8321_20200330_9.0.zip with a download size of 1.1 GB. It is built for the MediaTek MT8321 chipset and runs Android 9 (Pie), with a firmware build date of March 30, 2020. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Citi 1593 3G
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Digma Citi 1593 3G owners, this page hosts the original Digma stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Digma Citi 1593 3G a fresh start without the clutter that builds up over time. File Name: Digma_Citi_1593_3G_MT8321_20200330_9.0.zip File Size: 1.1 GB Back up your files, charge the Digma Citi 1593 3G past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Digma Citi 1593 3G should run like a brand new unit.
File Details
| File name | Digma Citi 1593 3G |
|---|---|
| Package | Digma_Citi_1593_3G_MT8321_20200330_9.0.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Chipset | MediaTek MT8321 |
| Android version | Android 9 (Pie) |
| Build date | March 30, 2020 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Citi 1593 3G with SP Flash Tool
- Confirm Digma Citi 1593 3G matches your exact device model and that the phone uses the MT8321 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Digma Citi 1593 3G free to download?
Yes, Digma Citi 1593 3G can be downloaded free of charge from this page.
How large is the download?
The Digma Citi 1593 3G package is 1.1 GB.
Which tool do I need to flash Digma Citi 1593 3G?
Digma Citi 1593 3G is MediaTek MT8321 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Digma Citi 1593 3G?
This firmware is Android 9 (Pie), built on March 30, 2020.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.