Digma Citi 10 E402 CS1235PL
Digma Citi 10 E402 CS1235PL is a Digma firmware file listed under Digma, distributed as Digma_Citi_10_E402_CS1235PL_Rev1_201111_SPD.zip with a download size of 1 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma Citi 10 E402 CS1235PL
Looking for the official stock firmware for your Digma Citi 10 E402 CS1235PL? You're in the right place. Below is the original Digma flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Digma_Citi_10_E402_CS1235PL_Rev1_201111_SPD.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Digma Citi 10 E402 CS1235PL should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Digma Citi 10 E402 CS1235PL |
|---|---|
| Package | Digma_Citi_10_E402_CS1235PL_Rev1_201111_SPD.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma Citi 10 E402 CS1235PL with SPD ResearchDownload
- Confirm Digma Citi 10 E402 CS1235PL matches your exact device model and that it is intended for Digma hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Digma Citi 10 E402 CS1235PL free to download?
Yes, Digma Citi 10 E402 CS1235PL can be downloaded free of charge from this page.
How large is the download?
The Digma Citi 10 E402 CS1235PL package is 1 GB.
Which tool do I need to flash Digma Citi 10 E402 CS1235PL?
Digma Citi 10 E402 CS1235PL is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.