Digma 8 X701
Digma 8 X701 is a Digma firmware file listed under Digma, distributed as Digma_Optima_8_X701_R1_201102_SPD.zip with a download size of 1.5 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 14 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Digma 8 X701
The Digma 8 X701 runs on Digma's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Digma 8 X701 to factory condition. File Name: Digma_Optima_8_X701_R1_201102_SPD.zip File Size: 1.5 GB Back up your files, charge the Digma 8 X701 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Digma 8 X701 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Digma 8 X701 |
|---|---|
| Package | Digma_Optima_8_X701_R1_201102_SPD.zip |
| Brand / Platform | Digma |
| Category | Digma |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1.5 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Digma 8 X701 with SPD ResearchDownload
- Confirm Digma 8 X701 matches your exact device model and that it is intended for Digma hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.5 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Digma 8 X701 free to download?
Yes, Digma 8 X701 can be downloaded free of charge from this page.
How large is the download?
The Digma 8 X701 package is 1.5 GB.
Which tool do I need to flash Digma 8 X701?
Digma 8 X701 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Digma devices. Always confirm it matches your specific model before flashing.