Aplus Zee Z10
Aplus Zee Z10 is a Aplus firmware file listed under Aplus, distributed as Aplus_Zee_Z10_MT6735_20161117_6.0.zip with a download size of 364 MB. It is built for the MediaTek MT6735 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of November 17, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Aplus Zee Z10
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Aplus Zee Z10 owners, this page hosts the original Aplus stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Aplus Zee Z10 back to square one. File Name: Aplus_Zee_Z10_MT6735_20161117_6.0.zip File Size: 364 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Aplus Zee Z10 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Aplus Zee Z10 |
|---|---|
| Package | Aplus_Zee_Z10_MT6735_20161117_6.0.zip |
| Brand / Platform | Aplus |
| Category | Aplus |
| Chipset | MediaTek MT6735 |
| Android version | Android 6.0 (Marshmallow) |
| Build date | November 17, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 364 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Aplus Zee Z10 with SP Flash Tool
- Confirm Aplus Zee Z10 matches your exact device model and that the phone uses the MT6735 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (364 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Aplus Zee Z10 free to download?
Yes, Aplus Zee Z10 can be downloaded free of charge from this page.
How large is the download?
The Aplus Zee Z10 package is 364 MB.
Which tool do I need to flash Aplus Zee Z10?
Aplus Zee Z10 is MediaTek MT6735 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Aplus Zee Z10?
This firmware is Android 6.0 (Marshmallow), built on November 17, 2016.
Which devices is this firmware for?
This file is intended for Aplus devices. Always confirm it matches your specific model before flashing.