Anmax Q2
Anmax Q2 is a Anmax firmware file listed under Anmax, distributed as Anmax_Q2_MT6572_V0.8_20171215_6.0.ZIP with a download size of 510 MB. It is built for the MediaTek MT6572 chipset and runs Android 6.0 (Marshmallow), with a firmware build date of December 15, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Anmax Q2
The Anmax Q2 runs on Anmax's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Anmax Q2 back to square one. File Name: Anmax_Q2_MT6572_V0.8_20171215_6.0.ZIP File Size: 510 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Anmax Q2 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Anmax Q2 |
|---|---|
| Package | Anmax_Q2_MT6572_V0.8_20171215_6.0.ZIP |
| Brand / Platform | Anmax |
| Category | Anmax |
| Chipset | MediaTek MT6572 |
| Android version | Android 6.0 (Marshmallow) |
| Build date | December 15, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 510 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Anmax Q2 with SP Flash Tool
- Confirm Anmax Q2 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (510 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Anmax Q2 free to download?
Yes, Anmax Q2 can be downloaded free of charge from this page.
How large is the download?
The Anmax Q2 package is 510 MB.
Which tool do I need to flash Anmax Q2?
Anmax Q2 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Anmax Q2?
This firmware is Android 6.0 (Marshmallow), built on December 15, 2017.
Which devices is this firmware for?
This file is intended for Anmax devices. Always confirm it matches your specific model before flashing.