Ambrane A3-7 Plus Duo
Ambrane A3-7 Plus Duo is a Ambrane firmware file listed under Ambrane, distributed as Ambrane_A3-7_Plus_Duo_MT6572_V17_141115.zip with a download size of 444 MB. It is built for the MediaTek MT6572 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Ambrane A3-7 Plus Duo
If your Ambrane A3-7 Plus Duo has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Ambrane flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Ambrane A3-7 Plus Duo a fresh start without the clutter that builds up over time. File Name: Ambrane_A3-7_Plus_Duo_MT6572_V17_141115.zip File Size: 444 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Ambrane A3-7 Plus Duo should run like a brand new unit.
File Details
| File name | Ambrane A3-7 Plus Duo |
|---|---|
| Package | Ambrane_A3-7_Plus_Duo_MT6572_V17_141115.zip |
| Brand / Platform | Ambrane |
| Category | Ambrane |
| Chipset | MediaTek MT6572 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 444 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Ambrane A3-7 Plus Duo with SP Flash Tool
- Confirm Ambrane A3-7 Plus Duo matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (444 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Ambrane A3-7 Plus Duo free to download?
Yes, Ambrane A3-7 Plus Duo can be downloaded free of charge from this page.
How large is the download?
The Ambrane A3-7 Plus Duo package is 444 MB.
Which tool do I need to flash Ambrane A3-7 Plus Duo?
Ambrane A3-7 Plus Duo is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Ambrane devices. Always confirm it matches your specific model before flashing.