Alps S5 Stock Firmware
Alps S5 Stock Firmware is a Alps firmware file listed under Alps, distributed as Alps_S5_MT6571_20150521_4.4.2.zip with a download size of 202 MB. It is built for the MediaTek MT6571 chipset and runs Android 4.4 (KitKat), with a firmware build date of May 21, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alps S5 Stock Firmware
Here you will find all the latest Alps firmware for Alps S5. If you are looking for Alps S5 stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Alps S5, if it is not, then flashing the below stock firmware can brick your device. The Alps S5 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Alps S5 Firmware File Name : Alps_S5_MT6571_20150521_4.4.2.zip File Size : 202 MB Get Firmware File Name : Alps_S5_MT6592_20150323_4.4.2.zip File Size : 379 MB Get Firmware Also: Alps P6 Stock Firmware How To Flash Alps S5 Stock Firmware Download and extract the Alps S5 firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Alps S5 firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Alps S5 device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Alps S5 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Alps S5 Stock Firmware |
|---|---|
| Package | Alps_S5_MT6571_20150521_4.4.2.zip |
| Brand / Platform | Alps |
| Category | Alps |
| Chipset | MediaTek MT6571 |
| Android version | Android 4.4 (KitKat) |
| Build date | May 21, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 202 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alps S5 Stock Firmware with SP Flash Tool
- Confirm Alps S5 Stock Firmware matches your exact device model and that the phone uses the MT6571 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (202 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alps S5 Stock Firmware free to download?
Yes, Alps S5 Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Alps S5 Stock Firmware package is 202 MB.
Which tool do I need to flash Alps S5 Stock Firmware?
Alps S5 Stock Firmware is MediaTek MT6571 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alps S5 Stock Firmware?
This firmware is Android 4.4 (KitKat), built on May 21, 2015.
Which devices is this firmware for?
This file is intended for Alps devices. Always confirm it matches your specific model before flashing.