Alive Plus S909 Prime Stock Firmware
Alive Plus S909 Prime Stock Firmware is a Alive firmware file listed under Alive, distributed as Alive_Plus_S909_Prime_MT6572_21092017_5.0.1.zip with a download size of 219 MB. It is built for the MediaTek MT6572 chipset and runs Android 5.0 (Lollipop), with a firmware build date of September 21, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alive Plus S909 Prime Stock Firmware
Here you will find all the latest Alive firmware for Alive Plus S909 Prime. If you are looking for Alive Plus S909 Prime stock ROM firmware, then you are on the right page. Before downloading, make sure your device is Alive Plus S909 Prime, if it is not, then flashing the below stock firmware can brick your device. The Alive Plus S909 Prime firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device. Download Alive Plus S909 Prime Firmware File Name : Alive_Plus_S909_Prime_MT6572_21092017_5.0.1.zip File Size : 219 MB Get Firmware Also: Alive G5 Plus Stock Firmware How To Flash Alive Plus S909 Prime Stock Firmware Download and extract the Alive Plus S909 Prime firmware package on your computer. After extracting the package, you will find USB Drivers, flashing tool, and firmware files. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC. Launch the firmware flashing tool and load the Alive Plus S909 Prime firmware files inside the flash tool. Connect your device to the computer using USB cable and begin the firmware flashing process. Once the flashing is completed, you will see a success message. Disconnect your Alive Plus S909 Prime device from the computer and restart the device. Follow Detailed Instructions Important Notes : [*] Disclaimer : Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device. [*] Take a Backup : If you are going to flash the above firmware on your Alive Plus S909 Prime device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware. [*] Broken link? Report here . [*] Have we missed any device model? Let us know by contacting us via Contact U
File Details
| File name | Alive Plus S909 Prime Stock Firmware |
|---|---|
| Package | Alive_Plus_S909_Prime_MT6572_21092017_5.0.1.zip |
| Brand / Platform | Alive |
| Category | Alive |
| Chipset | MediaTek MT6572 |
| Android version | Android 5.0 (Lollipop) |
| Build date | September 21, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 219 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alive Plus S909 Prime Stock Firmware with SP Flash Tool
- Confirm Alive Plus S909 Prime Stock Firmware matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (219 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alive Plus S909 Prime Stock Firmware free to download?
Yes, Alive Plus S909 Prime Stock Firmware can be downloaded free of charge from this page.
How large is the download?
The Alive Plus S909 Prime Stock Firmware package is 219 MB.
Which tool do I need to flash Alive Plus S909 Prime Stock Firmware?
Alive Plus S909 Prime Stock Firmware is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alive Plus S909 Prime Stock Firmware?
This firmware is Android 5.0 (Lollipop), built on September 21, 2017.
Which devices is this firmware for?
This file is intended for Alive devices. Always confirm it matches your specific model before flashing.