Akasaki A18
Akasaki A18 is a Akasaki firmware file listed under Akasaki, distributed as Akasaki_A18_MT6572_11202014_4.4.2.zip with a download size of 320 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Akasaki A18
The Akasaki A18 runs on Akasaki's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Akasaki_A18_MT6572_11202014_4.4.2.zip File Size: 320 MB Back up your files, charge the Akasaki A18 past 50 percent, install the matching drivers, and only then begin. Once installed, your Akasaki A18 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Akasaki A18 |
|---|---|
| Package | Akasaki_A18_MT6572_11202014_4.4.2.zip |
| Brand / Platform | Akasaki |
| Category | Akasaki |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.4 (KitKat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 320 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Akasaki A18 with SP Flash Tool
- Confirm Akasaki A18 matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (320 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Akasaki A18 free to download?
Yes, Akasaki A18 can be downloaded free of charge from this page.
How large is the download?
The Akasaki A18 package is 320 MB.
Which tool do I need to flash Akasaki A18?
Akasaki A18 is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Akasaki A18?
This firmware is Android 4.4 (KitKat).
Which devices is this firmware for?
This file is intended for Akasaki devices. Always confirm it matches your specific model before flashing.