Ajis S2
Ajis S2 is a Ajis firmware file listed under Ajis, distributed as Ajis_S2_MT6737T_7.0.zip with a download size of 546 MB. It is built for the MediaTek MT6737T chipset and runs Android 7.0 (Nougat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 7 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Ajis S2
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Ajis S2 owners, this page hosts the original Ajis stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Ajis_S2_MT6737T_7.0.zip File Size: 546 MB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Ajis S2 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Ajis S2 |
|---|---|
| Package | Ajis_S2_MT6737T_7.0.zip |
| Brand / Platform | Ajis |
| Category | Ajis |
| Chipset | MediaTek MT6737T |
| Android version | Android 7.0 (Nougat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 546 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Ajis S2 with SP Flash Tool
- Confirm Ajis S2 matches your exact device model and that the phone uses the MT6737T chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (546 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Ajis S2 free to download?
Yes, Ajis S2 can be downloaded free of charge from this page.
How large is the download?
The Ajis S2 package is 546 MB.
Which tool do I need to flash Ajis S2?
Ajis S2 is MediaTek MT6737T firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Ajis S2?
This firmware is Android 7.0 (Nougat).
Which devices is this firmware for?
This file is intended for Ajis devices. Always confirm it matches your specific model before flashing.