AG Glow
AG Glow is a AGmobile firmware file listed under AGmobile, distributed as AG_Glow_MT6572_01012016_5.1.zip with a download size of 696 MB. It is built for the MediaTek MT6572 chipset and runs Android 5.1 (Lollipop), with a firmware build date of January 01, 2016. It is flashed with SP Flash Tool. It was published on April 28, 2026. This page has been viewed 24 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About AG Glow
AG Glow Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: AG_Glow_MT6572_01012016_5.1.zip File Size: 696 MB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | AG Glow |
|---|---|
| Package | AG_Glow_MT6572_01012016_5.1.zip |
| Brand / Platform | AGmobile |
| Category | AGmobile |
| Chipset | MediaTek MT6572 |
| Android version | Android 5.1 (Lollipop) |
| Build date | January 01, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 696 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash AG Glow with SP Flash Tool
- Confirm AG Glow matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (696 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is AG Glow free to download?
Yes, AG Glow can be downloaded free of charge from this page.
How large is the download?
The AG Glow package is 696 MB.
Which tool do I need to flash AG Glow?
AG Glow is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is AG Glow?
This firmware is Android 5.1 (Lollipop), built on January 01, 2016.
Which devices is this firmware for?
This file is intended for AGmobile devices. Always confirm it matches your specific model before flashing.