5Star GR7
5Star GR7 is a 5Star firmware file listed under 5Star, distributed as 5Star_GR7_MT6261_V3.0_20190419_MIRA.zip with a download size of 3 MB. It is built for the MediaTek MT6261 chipset, with a firmware build date of April 19, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About 5Star GR7
If your 5Star GR7 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full 5Star flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the 5Star GR7 back to square one. File Name: 5Star_GR7_MT6261_V3.0_20190419_MIRA.zip File Size: 3 MB Back up your files, charge the 5Star GR7 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the 5Star GR7 returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | 5Star GR7 |
|---|---|
| Package | 5Star_GR7_MT6261_V3.0_20190419_MIRA.zip |
| Brand / Platform | 5Star |
| Category | 5Star |
| Chipset | MediaTek MT6261 |
| Build date | April 19, 2019 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 3 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash 5Star GR7 with SP Flash Tool
- Confirm 5Star GR7 matches your exact device model and that the phone uses the MT6261 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is 5Star GR7 free to download?
Yes, 5Star GR7 can be downloaded free of charge from this page.
How large is the download?
The 5Star GR7 package is 3 MB.
Which tool do I need to flash 5Star GR7?
5Star GR7 is MediaTek MT6261 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for 5Star devices. Always confirm it matches your specific model before flashing.